Instrument Calibration Lab in Clayton, OH (Dayton Area)
Instrument Calibration Solutions (ICS) operates an A2LA-accredited ISO/IEC 17025 calibration lab at 7550B Jacks Lane in Clayton, Ohio, serving manufacturers and labs across the Dayton region with in-lab and on-site calibration. The lab holds A2LA Certificate No. 2332.02 (valid to February 28, 2027) and calibrates dimensional, electrical, force, optical, video, pressure, temperature, torque and humidity instruments with as-found/as-left data on every certificate.
Our Clayton team specializes in force measurement and has been delivering force calibration, along with a full range of other calibration work, for three decades.
Clayton Lab at a Glance
| Address | 7550B Jacks Lane, Clayton, OH 45315 |
|---|---|
| Phone | 937-836-0064 |
| Accreditation | A2LA, ISO/IEC 17025:2017 and ANSI/NCSL Z540-1-1994, Certificate No. 2332.02 |
| Service | In-lab calibration, on-site calibration, repair (subject to parts availability) |
| Certificates | As-found/as-left data, NIST traceable, available in ICS LIVE |
What the Clayton Lab Calibrates
Highlights from the lab’s scope of accreditation:
| Discipline | Accredited capability (Clayton, OH) | On-site |
|---|---|---|
| Force | Force gauges up to 500 lbf; load cells and dynamometers up to 100,000 lbf (Morehouse PCM and UCM); force test stands (length and crosshead speed) | Lab |
| Torque | Torque wrenches 4 lbf·in to 600 lbf·ft; torque analyzers and transducers 2.5 lbf·in to 250 lbf·ft | Wrenches: yes |
| Dimensional | Micrometers and calipers up to 40 in, gage blocks up to 20 in, height gages up to 48 in, indicators, ring and plug gages, thread plugs, surface plates up to 192 in diagonal | Micrometers, calipers, surface plates: yes |
| Optical / video | Optical comparators (linear accuracy, angle, perpendicularity, magnification) and video measuring systems up to 24 in X-Y | Yes |
| Electrical | DC/AC voltage, current, resistance and capacitance; high-voltage measurement to 90 kV DC; clamp meters to 1,000 A; oscilloscopes; thermocouple and RTD simulation | Yes |
| Pressure | Pneumatic, absolute and vacuum; hydraulic up to 10,000 psi | Lab |
| Temperature & humidity | Thermometers and thermal equipment from -196 °C to 660 °C; relative humidity 10 to 80 % RH; infrared thermometers 35 to 500 °C | Temperature: yes |
| Mass, hardness & other | Scales and balances up to 30 kg / 500 lb, mass standards 1 mg to 35 kg, Rockwell hardness testers, pH meters, frequency and timers | Scales, frequency, timers: yes |
Instrument-Specific Calibration
- Force gauge calibration and load cell calibration
- Torque wrench calibration
- Micrometer and caliper calibration
- Pressure gauge calibration
- Video measuring system calibration and optical comparator calibration
Areas We Serve Near Clayton, OH
The Clayton lab performs in-lab and on-site calibration throughout the greater Dayton region, including Dayton, Englewood, Trotwood, Huber Heights, Miamisburg, West Carrollton and Vandalia. Our on-site routes cover most of the Dayton region, and ICS serves customers across Ohio, Pennsylvania, West Virginia, Indiana, Kentucky, Michigan and Iowa. Don’t see your city? Contact us.
Get Started
Call 937-836-0064, request a quote, or read how our on-site calibration works. Customers in western Pennsylvania are served by our Aliquippa, PA lab, and Northeast Ohio by our Canton mobile lab.
Frequently Asked Questions
Is the Clayton, OH calibration lab accredited?
Yes. The Clayton lab is accredited by A2LA to ISO/IEC 17025:2017 and ANSI/NCSL Z540-1-1994 under Certificate No. 2332.02, valid to February 28, 2027. Calibrations are traceable to NIST.
What is the force calibration range at the Clayton lab?
Force gauges, load cells and dynamometers are calibrated up to 100,000 lbf in tension and compression, using Morehouse ultra-precision load cells with portable and universal calibrating machines, and ASTM Class 6 and 7 weights for force gauges up to 500 lbf.
Do you offer on-site calibration in the Dayton area?
Yes. Our Clayton technicians perform on-site calibration of dimensional gages, optical comparators, video measuring systems, surface plates, torque wrenches, electrical test equipment, scales and balances, and thermometers and thermal equipment, as listed for field calibration on our scope.
How do I send equipment to the Clayton lab?
Drop it off at 7550B Jacks Lane, Clayton, OH 45315, or ship it via UPS, FedEx or USPS. Call 937-836-0064 or request a quote online to get started.
Where can I see my certificates?
All certificates, status updates and recall dates are available in ICS LIVE, our free online calibration management portal.