Micrometer & Caliper Calibration
Instrument Calibration Solutions (ICS) calibrates micrometers and calipers up to 40 in under A2LA ISO/IEC 17025 accreditation, on-site at your facility or in our labs in Aliquippa, PA and Clayton, OH. Every gage is checked against NIST-traceable gage blocks and the certificate reports as-found/as-left data.
Accredited Capability
| Equipment | Range | Best uncertainty (CMC) | On-site |
|---|---|---|---|
| Micrometers | Up to 40 in | From 4.0 µin/in + 10 µin (up to 1 in) | Yes, both labs |
| Calipers | Up to 40 in | See scope by lab | Yes, both labs |
| Height gages | Up to 48 in | See scope by lab | Lab |
| Indicators | Up to 2 in | From 16 µin (Aliquippa) | Lab |
| Gage blocks | 0.05 to 20 in | From 1.4 µin/in + 1.7 µin (Aliquippa) | Lab |
Full ranges and uncertainties are on our scopes of accreditation (Aliquippa 2332.01, Clayton 2332.02).
What We Calibrate
- Outside, inside, depth and bench micrometers
- Digital, dial and vernier calipers
- Height gages, indicators, bore gages and gage blocks
- Ring gages, plug gages, pins and thread plugs
How It Works
Each gage is cleaned and inspected first, because dirt, burrs or worn anvils cause more failed calibrations than drift. We then measure against gage blocks at points across the range, record as-found results, adjust where possible, and record as-left results. Certificates go to ICS LIVE with your next due date.
Related: dimensional calibration services and on-site calibration.
Frequently Asked Questions
What size micrometers and calipers can ICS calibrate?
Micrometers and calipers up to 40 in at both labs, using gage blocks traceable to NIST.
Can micrometers and calipers be calibrated on-site?
Yes. Micrometers and calipers are listed for field calibration on both ICS scopes, so we can calibrate them at your facility.
How often should calipers and micrometers be calibrated?
Annual calibration is common for gages in regular use. Shop-floor gages used every shift, or any gage that has been dropped, often justify a 6-month interval.
Is dimensional calibration accredited?
Yes. Micrometer, caliper and other dimensional calibration is on the A2LA ISO/IEC 17025 scopes of both ICS labs (Certificates 2332.01 and 2332.02).
Request a Quote
Call our Aliquippa, PA lab at 724-846-0136 or our Clayton, OH lab at 937-836-0064, or request a quote online. Certificates, status updates and recall dates are available any time in our free ICS LIVE portal.