Load Cell Calibration

Instrument Calibration Solutions (ICS) calibrates load cells and dynamometers up to 100,000 lbf, in tension and compression, under A2LA ISO/IEC 17025 accreditation at our labs in Aliquippa, PA and Clayton, OH. Results are NIST traceable and every certificate includes as-found/as-left data.

Accredited Load Cell Capability

Lab Range Reference standards
Clayton, OH (2332.02) 5 lbf to 100,000 lbf, tension and compression Morehouse ultra-precision load cells with portable calibrating machine (PCM) and universal calibration machine (UCM)
Aliquippa, PA (2332.01) Up to 50,000 lbf tension and compression; 50,001 to 100,000 lbf compression Reference load cells

Uncertainties (CMCs) for each sub-range are listed on our scopes of accreditation. The uncertainty for your load cell also depends on its resolution and behavior.

What We Calibrate

  • Tension and compression load cells
  • Dynamometers and crane-type force indicators within range
  • Load cells paired with their indicators, calibrated as a system
  • Force measurement test stands

Why Load Cell Calibration Matters

Load cells drift with use, overloads and temperature cycling. If a cell is reading high or low, every test it supports, from material tensile tests to press and assembly force checks, carries that error. A calibration with as-found data tells you whether past results were within tolerance and gives auditors documented, traceable evidence.

Related: force measurement and calibration and force gauge calibration.

Frequently Asked Questions

What load cell capacity can ICS calibrate?

Load cells and dynamometers up to 100,000 lbf. Our Clayton, OH lab uses Morehouse ultra-precision load cells with portable and universal calibrating machines for tension and compression; our Aliquippa, PA lab calibrates tension and compression up to 50,000 lbf and compression up to 100,000 lbf.

Is load cell calibration accredited?

Yes. Load cell calibration is on the A2LA ISO/IEC 17025 scopes of both ICS labs, with NIST-traceable results.

How often should a load cell be calibrated?

Annually is the most common interval. Calibrate sooner after an overload, shock, cable or connector damage, or a change in the indicator it is paired with.

Can you calibrate the load cell with its indicator?

Yes. Send the load cell with its readout so the system can be calibrated as it is used; tell us when you request a quote.

Request a Quote

Call our Aliquippa, PA lab at 724-846-0136 or our Clayton, OH lab at 937-836-0064, or request a quote online. Certificates, status updates and recall dates are available any time in our free ICS LIVE portal.