Force Gauge Calibration
Instrument Calibration Solutions (ICS) provides A2LA-accredited ISO/IEC 17025 calibration of digital and mechanical force gauges up to 500 lbf, in tension and compression, at our labs in Aliquippa, PA and Clayton, OH. Every gauge is calibrated by direct comparison to ASTM Class 6 and 7 weights and/or reference load cells, with as-found/as-left data and NIST traceability on the certificate.
Accredited Force Gauge Capability
| Equipment | Range | Best uncertainty (CMC) | Labs |
|---|---|---|---|
| Force gauges, tension & compression | Up to 500 lbf | ±0.01 % of reading + 0.002 lbf | Aliquippa, PA (2332.01); Clayton, OH (2332.02) |
| Load cells & dynamometers | Up to 100,000 lbf | See load cell calibration | Both labs |
| Force test stands (length, crosshead speed) | Up to 20 in travel; 0.005 to 20 in/min | See scope | Both labs |
CMC is the smallest uncertainty achievable on our scope; the uncertainty for your gauge also depends on its resolution and condition. Full details are on our accreditation page.
What We Calibrate
- Digital force gauges and mechanical (dial) force gauges from all major manufacturers
- Push-pull gauges used on test stands and handheld
- Motorized and manual force test stands, including length and crosshead speed
- Ergonomic force gauges used for workplace push/pull assessments
How Force Gauge Calibration Works
- Inspect and clean. Our technicians clean and inspect each gauge before testing so results reflect the instrument, not dirt or damage.
- Record as-found data at points across the gauge’s range in tension and compression.
- Adjust if needed and record as-left data.
- Issue the certificate with results, uncertainty and traceability, posted to ICS LIVE.
Need new equipment? ICS is a preferred distributor of Ametek, Mark-10, Chatillon and Lloyd force testing equipment; see force measurement equipment sales. Related: force measurement and calibration.
Frequently Asked Questions
How often should force gauges be calibrated?
Most quality systems use a 12-month interval. Shorten it for gauges used daily, used near full scale, or dropped or overloaded, and follow any interval your customer or industry standard specifies.
What force range can ICS calibrate?
Force gauges up to 500 lbf in tension and compression at both labs, and load cells and dynamometers up to 100,000 lbf.
Is force gauge calibration accredited?
Yes. Force gauge calibration is on the A2LA ISO/IEC 17025 scopes of both ICS labs (Certificates 2332.01 and 2332.02), with NIST-traceable results.
Do you calibrate mechanical and digital force gauges?
Yes. ICS calibrates digital and mechanical (dial) force gauges from all major manufacturers, and also sells and supports Ametek, Mark-10, Chatillon and Lloyd force testing equipment.
Can force gauges be calibrated on-site?
Force gauges are calibrated in our accredited labs. Ship them via UPS, FedEx or USPS, or drop them off; expedited service is available.
Request a Quote
Call our Aliquippa, PA lab at 724-846-0136 or our Clayton, OH lab at 937-836-0064, or request a quote online. Certificates, status updates and recall dates are available any time in our free ICS LIVE portal.