Williams TORKY 1501TP-1W Right-Angle Single Setting Wrench (20-170 in-lb)

Description

The Williams TORKY 1501TP-1W is a right-angle preset torque wrench built for production torque higher than a torque screwdriver can deliver, in a compact right-angle body that reaches fasteners a straight wrench can’t. It operates bi-directionally and gives a distinct tactile “break” at the set torque, designed to prevent over-clamp damage on a production line rather than relying on operator feel.

1/4″ male square drive, 20-170 in-lb (2.2-19.2 Nm) range, 8.3 oz. This is the un-set (“TP-1W”) version; Williams also offers this wrench factory pre-set with a certificate of calibration (“TPA-1-SETW” family) for lines that need a fixed, non-adjustable setting.

A good fit for production assembly where the fastener sits in a tight or awkward right-angle location and a standard straight-body wrench can’t get a clean approach.

**Frequently asked questions**

**How often does this need to be recalibrated?** Williams recommends annual recalibration for tools in regular use, or sooner if the tool is dropped, used outside its rated range, or run at high frequency in production. Keep the original NIST-traceable calibration certificate on file for your quality records.

**What standards does it meet?** Meets or exceeds ASME B107.300 (the current consolidated standard for hand torque tools, superseding the older B107.14) and ISO 6789. Each unit is individually serialized and ships with its own certificate of calibration.

**Can it be used in both directions?** Check the accuracy spec above — some models are calibrated clockwise (CW) only, others bidirectionally (CW/CCW). Using a CW-only tool for critical CCW work will not give a certified reading.