Instrument Calibration Lab in Aliquippa, PA (Pittsburgh Area)

Instrument Calibration Solutions (ICS) operates an A2LA-accredited ISO/IEC 17025 calibration lab at 413 Hopewell Avenue in Aliquippa, Pennsylvania, serving the greater Pittsburgh region with in-lab and on-site calibration. The lab holds A2LA Certificate No. 2332.01 (valid to August 31, 2027) and calibrates dimensional, electrical, force, optical, video, pressure, temperature, torque and humidity instruments with as-found/as-left data on every certificate.

Aliquippa is also our channel partner location for Optical Gaging Products (OGP) optical and video measurement systems, so the same team that sells and supports your OGP system can calibrate it.

Aliquippa Lab at a Glance

Address 413 Hopewell Avenue, Aliquippa, PA 15001
Phone 724-846-0136
Accreditation A2LA, ISO/IEC 17025:2017 and ANSI/NCSL Z540-1-1994, Certificate No. 2332.01
Service In-lab calibration, on-site calibration, repair (subject to parts availability), OGP sales and support
Certificates As-found/as-left data, NIST traceable, available in ICS LIVE

What the Aliquippa Lab Calibrates

Highlights from the lab’s scope of accreditation:

Discipline Accredited capability (Aliquippa, PA) On-site
Optical / video Optical comparators (linear accuracy, angle, perpendicularity, magnification); video measuring systems up to 24 in X-Y and 4 in Z; OGP TurnCheck height and width Yes
Dimensional Micrometers and calipers up to 40 in, gage blocks up to 20 in, height gages up to 48 in, ring and plug gages, thread plugs, tape measures up to 100 ft, laser length measurement up to 240 in, surface plates up to 192 in diagonal Micrometers, calipers, surface plates: yes
Pressure Pneumatic, absolute, vacuum and water column from 0.13 psia; hydraulic up to 10,000 psi Yes
Torque Torque wrenches 4 lbf·in to 600 lbf·ft; torque analyzers and transducers 2.5 lbf·in to 2,200 lbf·ft Wrenches: yes
Force Force gauges up to 500 lbf; load cells up to 100,000 lbf; force test stands Lab
Electrical DC/AC voltage, current, resistance and capacitance; high-voltage measurement to 90 kV DC; oscilloscopes to 1.1 GHz; RF power; thermocouple and RTD simulation Yes
Temperature & humidity Thermometers and thermal equipment from -200 °C to 660 °C; relative humidity up to 100 % RH; infrared thermometers 35 to 500 °C Temperature: yes
Mass, hardness & other Scales and balances up to 30 kg / 1,000 lb, Rockwell hardness testers, pH and conductivity meters, frequency to 3 GHz, timers Frequency, timers: yes

Instrument-Specific Calibration

Areas We Serve Near Aliquippa, PA

The Aliquippa lab performs in-lab and on-site calibration throughout the greater Pittsburgh region, including Pittsburgh, Beaver Falls, Ambridge, Moon Township, Cranberry Township and Coraopolis, and ICS serves customers across Pennsylvania, Ohio, West Virginia, Indiana, Kentucky, Michigan and Iowa. Don’t see your city? Contact us.

Get Started

Call 724-846-0136, request a quote, or read how our on-site calibration works. Customers in the Dayton region are served by our Clayton, OH lab, and Northeast Ohio by our Canton mobile lab.

Frequently Asked Questions

Is the Aliquippa, PA calibration lab accredited?

Yes. The Aliquippa lab is accredited by A2LA to ISO/IEC 17025:2017 and ANSI/NCSL Z540-1-1994 under Certificate No. 2332.01, valid to August 31, 2027. Calibrations are traceable to NIST.

Do you offer on-site calibration in the Pittsburgh area?

Yes. Our Aliquippa technicians perform on-site calibration of pressure instruments, torque wrenches, micrometers and calipers, optical comparators, video measuring systems, surface plates, electrical test equipment, and thermometers and thermal equipment, as listed for field calibration on our scope.

Can you calibrate OGP video measuring systems?

Yes. Video measuring systems (X-Y up to 24 in, Z up to 4 in) and OGP TurnCheck shaft measuring systems are on the Aliquippa scope, and Aliquippa is also our channel partner location for Optical Gaging Products (OGP) systems.

What pressure range does the Aliquippa lab cover?

Pneumatic, absolute, vacuum and water-column instruments from 0.13 psia, and hydraulic instruments up to 10,000 psi, in the lab or on-site.

How do I send equipment to the Aliquippa lab?

Drop it off at 413 Hopewell Avenue, Aliquippa, PA 15001, or ship it via UPS, FedEx or USPS. Call 724-846-0136 or request a quote online to get started.